Geothermal Heating and Cooling in Magnolia, Texas

Geothermal System

Geothermal heating and cooling in Magnolia, Texas, is an energy-saving possibility for your house.

Like heat pumps, a geothermal system moves heat from one part of the house to another. It makes use of a below-the-surface loop system to bring heat from the ground to your home.

This geothermal system uses the earth’s stored power, which can convert into substantial savings on your heating and cooling costs.

In comparison with conventional systems, the EPA says owners using geothermal heat pumps can see a return of 70% on heating and up to 50% on making your house cooler each year. This indicates you could possibly save between $400 to $1,500 every year, which could help your geothermal heating and cooling system yield a full return on your investment in just a few years.

A brand new geothermal system may also cause you to become eligible for heating and cooling rebates and tax incentives.

Give our sales staff a a ring at 281-231-8768 and we’ll help you layout the correct system for your home.

CALL TODAY 281-231-8768

8 Advantages of Using Geothermal Energy

Geothermal heating and cooling units are extremely economical and may last longer as normal furnaces and air conditioners. Here’s a few other benefits to putting one of these geothermal systems at your house:

savings icon

1. Cost Savings

Most geothermal heating and cooling units are just about three times better than fossil fuel systems. The Environmental Protection Agency has ascertained geothermal has the potential to save you nearly $1,500 every year. This investment may help the system pay for itself in just two or three years.

life span icon

2. Extended Years in Operation

Geothermal systems are likely to last longer than standard heating and cooling systems, mainly since they are buried. You can anticipate your geothermal heating and cooling equipment to continue operating for 20–25 years. Gas furnaces and electric heat pumps usually have to be changed out after 15 years.

free hot water icon

3. No Charge for Hot Water

Geothermal creates cost-free hot water. It can lessen your utility consumption of hot water up to 60%. Your actual savings will be based on your household size and what quantity of hot water your family uses.

Not only does the geothermal system produce hot water, in many cases it produces “more than free” hot water. This means the geothermal system actually becomes more effective when creating hot water.

heating and cooling icon

4. Joined Geothermal System

A system can heat and cool your residence. You won’t require a cooling unit outside or separate heating system in the house, unless you reside in a chilly climate. A split heating system is possible for regions where weather conditions frequently dip to a bitterly cold level.

humidity control icon

5. Improved Moisture Coordination

Geothermal sustains around 50 percent relative indoor wetness, making it very effective in humid rooms.

safe icon

6. Advanced Safety

As geothermal doesn’t use combustion to provide warmth, you don’t need to worry about gas leaks or carbon monoxide.

low maintenance icon

7. Low Maintenance

There is not as much maintenance required with a geothermal system given that there is no outdoors unit. This makes it less prone to failure throughout sultry summers. Since it doesn’t depend on external temperatures, no defrost controls are required like a conventional heat pump.

quiet icon

8. Silent Function

Geothermal is the same as anything else you purchase in life. Spending a small amount right now normally says you receive a small amount in return. Well-built and properly hooked up geothermal units will provide you many months of uninterrupted performance.

Styles of Geothermal Heating and Cooling Equipment

Open and closed geothermal loop systems

There are two standard styles of geothermal systems: open loop and closed loop.

Since these loops are located under the surface, initial installation will affect your lawn. Nevertheless, the loops won’t be visible after the grass has grown back.

Open Loop Geothermal

Open loop geothermal utilizes groundwater to transport warmth. It can be arranged to operate with a well, pond or lake.

This system is usually the most cost effective and efficient due to reliable groundwater temperatures. However, it’s not always possible due to a scarcity of groundwater or too much iron in the groundwater. Local regulations may also prevent these geothermal heating and cooling systems in your area.

Closed Loop Geothermal

Closed loop geothermal uses a continuous loop to transfer water (or antifreeze solution for cold parts of the country) to the earth and transport it back to the geothermal unit. The water is recirculated in a pressurized pipe rather than combining new water.

There are several installation choices, including horizontal, slinky and vertical.

Get ahold of the Geothermal Heating and Cooling Pros at JTech Mechanical

Geothermal equipment is a sound savings in your home. But picking the right equipment and perfect company to hook up the equipment can feel like a confusing process. At JTech Mechanical, we design it to be easy with expert assistance from our heating and cooling professionals.

Give us a call at 281-231-8768 or contact us by email to get underway as soon as possible.

CALL TODAY 281-231-8768