While your Lennox® heating system isn’t able to chat with you, it has a procedure to get your attention when there’s a furnace error.
Its control panel has a set of LED lights that can share a fault code. Based on the issue, your furnace may show solid or flashing lights.
Though there are some simple heating fixes you can finish on your own, most repairs are best taken care of by experts. When your heating system refuses to kick on or put out warmth, get in touch with JTech Mechanical at 281-231-8768 for expert furnace repair in Magnolia.
Our experts will quickly detect and take care of the breakdown, even if you don’t use a Lennox heating system. We can repair whichever kinds or models—and get the heat reintroduced to your residence fast.
What Does the Flickering Light on My Heater Mean?
Your furnace depends on lights to flash code when it is malfunctioning. It also works this system to let you know it’s operating like it should.
Correct operation includes:
- Simultaneous slow flash—heater working correctly.
- Simultaneous fast flash—heater is beginning to call for heat.
If you realize that a single light blinking slowly and the other going on and off fast, your heater might be experiencing a low flame signal. This can take place even when your furnace is running properly. It indicates the flame sensing rod might be dirty or in the incorrect spot on the burner. Contact us at 281-231-8768 for assistance.
Here are a few other of the most common problems for Lennox heaters.
Furnace Refuses to Turn On
Here are a few of the light patterns you might see when your heat won’t turn on or keep operating. Most of these issues must be handled by a professional, for instance from JTech Mechanical.
- The pair of LED lights are extinguished. This means your HVAC system might not have electricity. Look at the breaker box to ensure the heating system fuse is not tripped. Attempt to reset the fuse if it is in the “off” area. If it immediately flips following a reset, don’t try to reset it again and contact us at 281-231-8768.
- A single light is continuous and the other is flashing slowly. This signifies the flame rollout switch is may be open. The switch is a critical safety mechanism that assists in preventing fires and carbon monoxide. You shouldn’t attempt to handle this problem yourself.
- A single light is flashing fast and the other is flickering slowly. This likely indicates power polarity has been transposed. Your heating system could have a wiring problem that calls for professional aid from JTech Mechanical.
- All lights are flashing slowly. This signifies your heater’s blower motor possibly isn’t running. This part distributes heated air from the heater into your rooms. We can aid in determining what’s causing an issue with this part.
- One light is flashing slowly and the other is flickering rapidly. This signifies your HVAC system could have insufficient voltage or a short circuit. Get in touch with our specialists at 281-231-8768 for help.
- One light is flickering on, on, off while the other flashes on, off, on. This indicates there could be trouble with your HVAC system’s control panel or wiring. JTech Mechanical can find the problem and take care of it.
- Both lights show alternating slow flickers. This means your HVAC system possibly has a flame problem. There could be a problem with its gas supply, gas valve or ignitor control. Call us at 281-231-8768 for support.
- A single light flickers slowly while the other remains solid. This often signifies your heater’s limit switch is malfunctioning. The switch prevents your HVAC equipment from getting too hot. Get in touch with the experts at JTech Mechanical for support.
Heating System Blower Works But No Heat
Here’s what might be broken when you hear your heating system’s blower fan working, but you aren’t receiving any heated air.
- The pair of lights are giving every other rapid flickers. This signifies your furnace ignitor may not be working. This component kindles energy in your heater to make heat and should be fixed by a technician from JTech Mechanical.
Trust Us for Skilled Furnace Repair
When you need to have your HVAC equipment fixed without delay, trust the experts at JTech Mechanical. Our techs will fix the error quickly and have your residence feeling relaxing again in a short time. Contact us at 281-231-8768 or contact us online to schedule an appointment now.